High Professional Vaccume Reflow Oven Circuit Reflow Oven Reflow Oven Manufacturer From China
The domestic reflow soldering machine is a crucial piece of equipment in the electronics manufacturing industry, primarily used for soldering surface mount devices (SMDs) onto printed circuit boards (PCBs). This machine ensures reliable electrical connections and is essential for producing high-quality electronic assemblies.
Functionality:
1. Heating Process: The reflow soldering machine uses a controlled heating process to melt solder paste applied to the PCB. The heating is typically done in multiple zones, allowing for precise temperature control to avoid damaging sensitive components.
2. Solder Paste Application: Prior to reflow, solder paste is applied to the PCB pads. The machine can accommodate various types of solder pastes, ensuring compatibility with different components and applications.
3. Conveyor System: The machine features a conveyor system that transports PCBs through different heating zones. This continuous movement allows for efficient processing of multiple boards in a single run.
4. Cooling Phase: After the soldering process, the PCBs enter a cooling zone where they are rapidly cooled to solidify the solder joints. This step is critical for ensuring strong and reliable connections.
5. Quality Control: Many reflow soldering machines include integrated inspection systems to check for defects such as insufficient solder or misaligned components, ensuring that only quality products proceed to the next manufacturing stage.
Usage Instructions:
1. Setup: Position the reflow soldering machine in a clean and controlled environment. Ensure all necessary connections and materials are ready.
2. Load PCBs: Place the PCBs onto the conveyor system, ensuring they are properly aligned and secured.
3. Configure Settings: Use the control panel to input parameters such as temperature profiles, conveyor speed, and time settings based on the solder paste specifications.
4. Start the Reflow Process: Activate the machine and monitor the process to ensure that the heating and cooling phases occur as planned.
5. Regular Maintenance: Conduct routine checks and maintenance to ensure the machine operates efficiently and reliably.
| | RF-8820PC-LF | RF-8810PC/LS-LF | RF-8830PC/LS-LF |
| Dimension | 5000×1200×1550mm | 4600×1000×1550mm | 4600×1500×1550mm |
| Weight | 1800kg | 1200kg | 1600kg |
| Number of heating zone | Top 8/Bottom 8 | | |
| Length of heating zone | 3160mm | 2800mm | 2800mm |
| Cooling quantity | Up 2/Bottom 2 | Up 1/Bottom 1 | Up 1/Bottom 1 |
| Air discharge requirement | 10m³/min×2 | | |
| Power requirements | 3 phase 380V 50/60Hz | | |
| Starting power | 36KW | 32KW | 48KW |
| Operating power | 7KW | 6.5KW | 8KW |
| Heating time | Approx: 20min | | |
| Temperature control range | Room temp-320°C | | |
| Temperature control Mode | PID closed-loop control with SSR drive (computer + PLC) | | |
| Temperature control precision | ±1°C | | |
| Temperature deviation On PCB | ± 2°C | | |
| Abnormal alarm | Ultra high temperature or low temperature alarm | | |
| Maximum width of PCB | 50-500mm | 50-450mm | 50-600/700/800mm |
| Guide rail width range | 50-400mm | 50-370mm | 50-500/600/700mm |
| PCB element height | Top 30mm Bottom 25mm | | |
| Transportation direction | L-R (Option: R-L) | | |
| Transportation speed | 0-1800mm/min | | |
| Transportation height | 900±20mm | | |
| Transport guide rail fixation | Front end fixed (Option: Back end fixed) | | |
| Cooling mode | | Force wind cooling | |
| PCB transport mode | Chain +Ribbon | Chain (Chain optional) | Chain (Chain optional) |
Application Areas:
Domestic reflow soldering machines are widely used in:
1. Consumer Electronics: For assembling devices like smartphones, tablets, and computers.
2. Automotive Electronics: In the production of electronic control units and sensors.
3. Medical Devices: For soldering components in critical medical equipment.
The domestic reflow soldering machine is essential for ensuring high-quality solder joints and reliable electronic assemblies in various applications.
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
We have full range of SMT pick and place machine For FUJI,JUKI,SAMSUNG,YAMAHA, and so on,feeder,nozzle,smt pick and place machine,PCB Conveyor,
cylinder,and vibration feeder,anything you need ,just tell me!
The main brand is Fuji YAMAHA Samsung SONY heavy machine
1. SMT lubricating oil
2. SMT parts
3. Nozzle and feeder
4. SMT belt and other parts in the machine
Product Tags:
|
|
CE SMT Reflow Soldering Oven , 220V Convection Reflow Oven Images
|
